 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MHL19926/D The RF Line PCS Band RF Linear LDMOS Amplifier Designed for ultra--linear amplifier applications in 50 Ohm systems operating in the PCS frequency band. A silicon FET Class A design provides outstanding linearity and gain. In addition, the excellent group delay and phase linearity characteristics are ideal for digital modulation systems, such as TDMA, EDGE and CDMA. * Third Order Intercept Point: 50 dBm Typ * Power Gain: 29.4 dB Typ (@ f = 1960 MHz) * Excellent Phase Linearity and Group Delay Characteristics * Ideal for Feedforward Base Station Application MHL19926 1930-1990 MHz, 10 W, 29.4 dB RF LINEAR LDMOS AMPLIFIER CASE 301AY-01, STYLE 1 ABSOLUTE MAXIMUM RATINGS (TC = 25C unless otherwise noted) Rating DC Supply Voltage RF Input Power Storage Temperature Range Operating Case Temperature Range Symbol VDD Pin Tstg TC Value 30 +17 --40 to +100 --20 to +100 Unit Vdc dBm C C ELECTRICAL CHARACTERISTICS (TC = +25C; VDD = 26 Vdc; 50 System) Characteristic Supply Current Power Gain Gain Flatness Power Output @ 1 dB Compression Input VSWR Third Order Intercept Noise Figure (f = 1960 MHz) (f = 1930--1990 MHz) (f = 1960 MHz) (f = 1930--1990 MHz) (f1 =1957 MHz, f2=1962 MHz) (f = 1990 MHz) Symbol IDD Gp GF P1 dB VSWRin ITO NF Min -- 28.4 -- 39 -- 49.5 -- Typ 1 29.4 0.3 40 1.2:1 50 4.2 Max 1.05 30.4 0.5 -- 1.5:1 -- 5 dBm dB Unit A dB dB dBm NOTE -- CAUTION -- MOS devices are susceptible to damage from electrostatic charge. Reasonable precautions in handling and packaging MOS devices should be observed. REV 2 MOTOROLA RF Motorola, Inc. 2003 DEVICE DATA MHL19926 1 PACKAGE DIMENSIONS A B A G B 0.51 (0.020) M TA S M NOTES: 1. CONTROLLING DIMENSION: MILLIMETER. 2. INTERPRET DIMENSIONS AND TOLERANCES PER ANSI Y14.5M, 1982. 3. DIMENSION F TO CENTER LINE OF LEADS. MILLIMETERS MIN MAX 44.7 45.21 34.8 35.31 6.22 6.73 0.43 0.58 2.03 2.54 2.18 BSC 41.91 BSC 32.77 BSC 6.76 7.11 3.18 4.19 25.15 BSC 7.37 BSC 9.91 BSC 0.2 0.33 3 3.35 13.59 14.1 11.3 11.81 2.29 BSC INCHES MIN MAX 1.760 1.780 1.370 1.390 0.245 0.265 0.017 0.023 0.080 0.100 0.086 BSC 1.650 BSC 1.290 BSC 0.266 0.280 0.125 0.165 0.990 BSC 0.290 BSC 0.390 BSC 0.008 0.013 0.118 0.132 0.535 0.555 0.445 0.465 0.090 BSC R 1 2 34 5 S J 5X 2X K W M N L H 5X Q 0.2 (0.008) M TS M A M D M 0.51 (0.020) TB M DIM A B C D E F G H J K L M N P Q R S W T C 5X P M SEATING PLANE E STYLE 1: PIN 1. 2. 3. 4. 5. CASE: RF INPUT VDD1 VDD2 VDD3 RF OUTPUT GROUND 0.51 (0.020) TB F M CASE 301AY-01 ISSUE O Information in this document is provided solely to enable system and software implementers to use Motorola products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters that may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals", must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. MOTOROLA and the Stylized M Logo are registered in the US Patent and Trademark Office. All other product or service names are the property of their respective owners. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. E Motorola Inc. 2003 HOW TO REACH US: USA/EUROPE/LOCATIONS NOT LISTED: Motorola Literature Distribution P.O. Box 5405, Denver, Colorado 80217 1--800--521--6274 or 480--768--2130 JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center, 3--20--1, Minami--Azabu, Minato--ku, Tokyo 106--8573, Japan 81--3--3440--3569 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre, 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong 852--26668334 HOME PAGE: http://motorola.com/semiconductors MHL19926 2 MOTOROLA RF DEVICE DATA MHL19926/D |
Price & Availability of MHL19926
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |